| AMFOR® reverse osmosis (RO) elements offer the highest quality water for small commercial systems. |
|
*AMFOR membranes are available in a variety of sizes to meet a wide range of space requirements. Nowdays, AMFOR TW30XLE-3020-600, TW30XLE-3020-1000 have been widely used in commercial drinking machine.
|
|
*AMFOR XLE extra low energy elements operate at the lowest pressure in the industry,resulting in lower energy costs and enabling system builders to use lower cost components.
|
|
*In addition to the highest quality water and the lowest energy costs, AMFOR membranes also deliver savings by providing the industry's longest lasting and most reliable performance.
|
Product Specifications
|
|
Product
|
Active Area
Ft2(m2)
|
Applied Pressure psig (bar)
|
Permeate Flow Rate gpd(m3/d)
|
Stabilized Salt Rejection(%)
|
|
TW30XLE-3020-600
|
20(1.9)
|
100(6.9)
|
600(2.27)
|
98.0
|
|
TW30XLE-3020-1000
|
33(3.1)
|
100(6.9)
|
1000(3.78)
|
98.0
|
|
TW30-2514
|
7(0.7)
|
225(15.5)
|
200(0.76)
|
99.5
|
|
TW30-2521
|
13(1.2)
|
225(15.5)
|
325(1.23)
|
99.5
|
|
TW30XLE-2521
|
13(1.2)
|
100(6.9)
|
330(1.30)
|
99.0
|
|
TW30-2540
|
28(2.6)
|
225(15.5)
|
850(3.21)
|
99.5
|
|
TW30LE-2540
|
28(2.6)
|
145(10)
|
850(3.21)
|
99.2
|
|
TW30XLE-2540
|
28(2.6)
|
100(6.9)
|
850(3.21)
|
99.0
|
|
TW30-4014
|
20(1.9)
|
225(15.5)
|
525(1.99)
|
99.5
|
|
TW30-4021
|
36(3.3)
|
225(15.5)
|
900(3.41)
|
99.5
|
|
TW30XLE-4021
|
36(3.3)
|
100(6.9)
|
1000(3.78)
|
99.0
|
|
TW30-4040
|
87(8.1)
|
225(15.5)
|
2160(8.17)
|
99.5
|
|
TW30LE-4040
|
87(8.1)
|
145(10)
|
2340(8.85)
|
99.2
|
|
TW30XLE-4040
|
87(8.1)
|
100(6.9)
|
2340(8.85)
|
99.0
|
|
TW30-4611
|
36(3.3)
|
225(15.5)
|
900(3.41)
|
98.0
|
|
TW30-4619
|
60(5.4)
|
225(15.5)
|
1450(5.48)
|
99.0
|
|
TW30-4641
|
110(11.2)
|
225(15.5)
|
3800(14.38)
|
99.0
|
|
|
1. Permeate flow and salt rejection based on the following test conditions: TW30 elements are tested on a 2,000ppm NaCl- feed stream, XLE performance based on a 500 ppm NaCl feed stream, pressure specified above, 77 。F (25℃) and the fol owing recovery rates; TW30-3020 , TW30-2521, XLE-2521, TW30-4021, XLE-4021 - 8%, TW30-2514, TW30-4014-5%, Other-15%
|
| 2. Permeate flows for individual elements may vary +/-20%. |
| 3. For the purpose of improvement, specifications may be updated periodically. |
|
Product
|
Dimensions-Inches
|
|
A
|
B
|
C
|
D
|
|
TW30-2514
|
14.0(356)
|
1.19(30.2)
|
0.75(19)
|
2.4(61)
|
|
TW30-2521
|
21.0(533)
|
1.19(30.2)
|
0.75(19)
|
2.4(61)
|
|
TW30XLE-2521
|
21.0(533)
|
1.19(30.2)
|
0.75(19)
|
2.4(61)
|
|
TW30-2540
|
40.0(1016)
|
1.19(30.2)
|
0.75(19)
|
2.4(61)
|
|
TW30LE-2540
|
40.0(1016)
|
1.19(30.2)
|
0.75(19)
|
2.4(61)
|
|
TW30XLE-2540
|
40.0(1016)
|
1.19(30.2)
|
0.75(19)
|
2.4(61)
|
|
TW30-4014
|
14.0(356)
|
1.05(26.7)
|
0.75(19)
|
3.9(99)
|
|
TW30-4021
|
21.0(533)
|
1.05(26.7)
|
0.75(19)
|
3.9(99)
|
|
TW30XLE-4021
|
21.0(533)
|
1.05(26.7)
|
0.75(19)
|
3.9(99)
|
|
TW30-4040
|
40.0(1016)
|
1.05(26.7)
|
0.75(19)
|
3.9(99)
|
|
TW30LE-4040
|
40.0(1016)
|
1.05(26.7)
|
0.75(19)
|
3.9(99)
|
|
TW30XLE-4040
|
40.0(1016)
|
1.05(26.7)
|
0.75(19)
|
3.9(99)
|
|
TW30-4611
|
11.45(291)
|
--
|
0.75(19)
|
4.61(117)
|
|
TW30-4619
|
19.30(490.2)
|
--
|
0.75(19)
|
4.61(117)
|
|
TW30-4641
|
41.31(1049)
|
2.19(56)
|
0.75(19)
|
4.61(117)
|
Operation Limits
Membrane Type ............................................................................................Polyamide Thin-Film Composite
Maximum Operating Pressure .................................................................................................. 600psi (41bar)
Maximum Pressure Drop ............................................................................................................ 13psi (0.9bar)
pH Range Continuous Operationa ......................................................................................................... 2-11
pH Range, Short-Term Cleaning(30min)b ....................................................................................... 1-12
Maximum Operating Temperature ........................................................................................... 113 。F (45℃)
Maximum Feed water Turbidity ................................................................................................................ 1 NTU
Maximum Feed Silt Density Index .................................................................................................................... 5
Free Chlorine Tolerancec ....................................................................................................................< 0.1ppm
a Maximum temperature for continuous operation above pH 10 is 95。F (35℃).
b Refer to Cleaning Guidelines of ANDE-AMF.
c Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, AMFOR recommends removing residual free chlorine by pretreatment prior to membrane exposure. Please refer to technical bul etin ANDE-AMF for more information.
|
